Thank you for choosing Machine Link™ QUICK Serve ‐ PLUS!

You can evaluate this product FREE for 45 days.


  • Email/Text MSG Support (+$500) ‐ allows file requests to be emailed or sent via text message directly to Machine Link™ QUICK Serve PLUS, and then quickly served to the specified CNC machine tool control. This is the ideal solution for machines that communicate in one direction (to the control), such as ADR BTRs.


Getting started with Machine Link™ QUICK Serve PLUS


Installing Machine Link™ QUICK Serve PLUS

  • Run the downloaded Machine Link™ QUICK Serve PLUS installer ‐ it will quickly install on all versions of Windows from Windows XP up
    Have an older version of Windows? We have an installer for that! Contact us for details.

Note: Until registered, Machine Link™ QUICK Serve PLUS needs to run with Administrative Privileges

Configuring your first CNC Machine

  1. Run Machine Link™ QUICK Serve PLUS
  2. Click [CONFIGURE] and then select [Table], [Insert Row] from the top menu bar
  3. Press [CONFIGURE] and enter the name of your machine
  4. Enter configuration information for the machine (COM port, baud rate, data bits, stop bits, parity, etc.)
    If you are unsure of the machine settings, start with the default values by clicking [DEFAULTS]
  5. Check-mark [Active in Scan List]
  6. Click [ACCEPT] and then [SAVE]

Pro Tip: Machine Link™ QUICK Serve PLUS has built-in help - turn it on by clicking [Help], [Show Context Help] from the top menu bar.

Manually receiving from your first CNC Machine

Important: It is recommended to successfully manually receive a file from the CNC machine tool before attempting to send a file to the CNC machine. Receiving a file will validate that the CNC machine's COM port and the computer's COM port are both operational and that the cable is, for the most part, configured correctly.

  1. Select [File], [Receive from CNC] from the top menu bar
  2. Select the machine tool name you entered from the [Configured Machine Controls] list
  3. Click [RECEIVE] and then punch/output the file from the machine tool control
    Machine Link™ QUICK Serve PLUS will continue to wait until activity is seen on the COM port. When data is seen, Machine Link™ QUICK Serve PLUS will begin to flash, indicating that data is being received
  4. After successfully receiving a file, press [SAVE] and then [EXIT]

Troubleshooting

  1. If Machine Link™ QUICK Serve PLUS does not flash, insert a null modem adaptor and resend the file
    If Machine Link™ QUICK Serve PLUS still does not flash, perform a COM Port/Cable Test
  2. If Machine Link™ QUICK Serve PLUS flashes, but the file is garbled, adjust the communication parameters

Still having problems? Give us a call at (800) 838-3479. We are here and happy to help!

Manually sending to your first CNC Machine

  1. Once you have successfully received a file with Machine Link™ QUICK Serve PLUS, prepare the CNC machine tool control to receive a file
  2. Select [File], [Send to CNC] from the top menu bar
  3. Select the machine tool name you entered from the [Configured Machine Controls] list
  4. Click [SELECT FILE] and select the previously-saved CNC program file
  5. Click [SEND] ‐ the selected file will be transferred to the CNC machine

Initiating your first automated file request at the CNC Machine

  1. Click [CONFIGURE] and then select the machine tool name you entered
  2. Select the [Auto Send] tab and enter a SEND COMMAND, Trigger START, Trigger END, and SEND FROM FOLDER
    Tip: Context Help provides useful information on the fields, and easy-to-follow examples can be found in the Machine Link™ QUICK Serve PLUS manual!
  3. At the CNC machine tool control, create/load the CNC Request Program (O1111)
  4. Enter the desired CNC file name into the Request Line
  5. Punch/output the edited Request Program from the machine tool control
  6. Prepare the machine tool control to receive the requested CNC file
  7. After a short adjustable delay, Machine Link™ QUICK Serve PLUS will serve the requested CNC file back to the machine tool control